auteltech

MaxiDIAG MD808 Pro

OBD2 All System Diagnostic Code Scanner

The MaxiDIAG MD808 Pro is built to take your diagnostic experience to a whole new level. Loaded with oil service reset, battery registration and reset, parking brake pad relearn after replacement, steering angle sensor relearn and diesel particulate filter regeneration functions, MD808 Pro can access ALL available modules for the best diagnosis operations. With all that enclosed in a 4-inch hand-held device, there is no better multifunctional scan tool on the market.


• Support Read/Clear Codes and Live Data functions for ALL systems


• Read and clear trouble codes, control and test BMS/Oil Reset/ SRS/EPB/DPF systems


• Support oil service reset


• Support battery registration and reset


• Diesel particulate service including forced regeneration


• Reset steering angle sensor (SAS) functionality


• Relearn parking brake pad after replacement


• Reset service mileage and service intervals


• Turn off ECU brake warning light


• Perform O2 monitor, on-board monitor, I/M readiness and component testing


• Print diagnostic reports via PC connection


• Global OBD II coverage for U.S. domestic, Asian and European makes and models


• All OBD II protocols, all 10 test modes and enhanced OBD II mode 6 support

ProcessorARM® Thumb® Processor (400 MHz)
Memory32MB, 166 MHz
Display4.0 inch LCD with 800x480 resolution
ConnectivityMini USB: 2.0 Micro SD Card (16GB)
Power Consumption1.7 W
Operating Temperature-10°C to 60°C (14°F to 140°F)
Storage Temperature-20°C to 70°C (-4°F to 158°F)
Operating Humidity5% - 95% non-condensing
HousingStrong plastic housing with protective rubber boot
Dimensions (W x H x D)202 mm x 92 mm x 35 mm (8.35” x 3.62” x 1.4”)
Weight313 g (0.69 lb.)
  • Autel MaxiDiag MD808 Pro — Introduction

  • Description
  • • Support Read/Clear Codes and Live Data functions for ALL systems


    • Read and clear trouble codes, control and test BMS/Oil Reset/ SRS/EPB/DPF systems


    • Support oil service reset


    • Support battery registration and reset


    • Diesel particulate service including forced regeneration


    • Reset steering angle sensor (SAS) functionality


    • Relearn parking brake pad after replacement


    • Reset service mileage and service intervals


    • Turn off ECU brake warning light


    • Perform O2 monitor, on-board monitor, I/M readiness and component testing


    • Print diagnostic reports via PC connection


    • Global OBD II coverage for U.S. domestic, Asian and European makes and models


    • All OBD II protocols, all 10 test modes and enhanced OBD II mode 6 support

  • Specifications
  • ProcessorARM® Thumb® Processor (400 MHz)
    Memory32MB, 166 MHz
    Display4.0 inch LCD with 800x480 resolution
    ConnectivityMini USB: 2.0 Micro SD Card (16GB)
    Power Consumption1.7 W
    Operating Temperature-10°C to 60°C (14°F to 140°F)
    Storage Temperature-20°C to 70°C (-4°F to 158°F)
    Operating Humidity5% - 95% non-condensing
    HousingStrong plastic housing with protective rubber boot
    Dimensions (W x H x D)202 mm x 92 mm x 35 mm (8.35” x 3.62” x 1.4”)
    Weight313 g (0.69 lb.)
  • Video
    • Autel MaxiDiag MD808 Pro — Introduction

  • Comparison
  • Downloads
  • Accessories