auteltech
image 1
image 1
image 1
image 1
image 1
image 1
image 1

G-Box3

KEY PROGRAMMING ADAPTER FOR MERCEDES AND BMW VEHIC

The Autel G-BOX3 is an adapter compatible with Autel’s MaxiIM IM608 and MaxiIM IM508 tablets (with the purchase of XP400Pro programmer) that aids in the programming of keys to Mercedes DAS3 CAN EIS/EXS vehicles in an ALL Keys Lost situation. The G-Box3 also supports DME/DDE ISN Reading and Writing in Boot Mode on applicable BMW vehicles. Bench Method is also supported. All Keys Lost password calculations are approximately 4x to 8x faster.


                                                                         

  • image 1
  • image 1
  • image 1
  • image 1
  • image 1
  • image 1

•MaxiIM Key Programming Tablet Accessory, compatible with IM608 and IM508 (with Xp400pro purchase)

•Mercedes-Benz All Keys Lost, Faster Password Calculation

•Mercedes-Benz All Keys Lost, eliminates repeated Insertions within the process

•Mercedes-Benz All Keys Lost, Can Be Programmed on the Vehicle Without Removing the Electronic Ignition Switch (EIS)

•BMW DME/DDE ISN Reading and Writing in Boot Mode or Bench Method

•Contains All Connections Including Cables, Fuse Connector, and CAN Line Connectors


TEST POWER20W Max
TEST PRESSURE RANGE0-30KPa
SENSOR RESOLUTION1 Pa
TEST ACCURACY±5pa
COMMUNICATION PORTRS-232 / USB
DATA STORAGEInternal memory/ download via USB disk
POWER SUPPLYAC 220V
AIR SUPPLY0.1‒1.0 MPa dry compressed air
AIR INLET PORT/TEST PORTφ6mm air pipe/φ6mm air pipe
WORK TEMPERATURE/HUMIDITY10%‒90% @25°C, without condensation
DIMENSIONS (WEIGHT)280*300*200 mm 3.5kg
  • Description
  • •MaxiIM Key Programming Tablet Accessory, compatible with IM608 and IM508 (with Xp400pro purchase)

    •Mercedes-Benz All Keys Lost, Faster Password Calculation

    •Mercedes-Benz All Keys Lost, eliminates repeated Insertions within the process

    •Mercedes-Benz All Keys Lost, Can Be Programmed on the Vehicle Without Removing the Electronic Ignition Switch (EIS)

    •BMW DME/DDE ISN Reading and Writing in Boot Mode or Bench Method

    •Contains All Connections Including Cables, Fuse Connector, and CAN Line Connectors


  • Specifications
  • TEST POWER20W Max
    TEST PRESSURE RANGE0-30KPa
    SENSOR RESOLUTION1 Pa
    TEST ACCURACY±5pa
    COMMUNICATION PORTRS-232 / USB
    DATA STORAGEInternal memory/ download via USB disk
    POWER SUPPLYAC 220V
    AIR SUPPLY0.1‒1.0 MPa dry compressed air
    AIR INLET PORT/TEST PORTφ6mm air pipe/φ6mm air pipe
    WORK TEMPERATURE/HUMIDITY10%‒90% @25°C, without condensation
    DIMENSIONS (WEIGHT)280*300*200 mm 3.5kg
  • Video
  • Comparison
  • Downloads
  • Accessories