by Bill Andreas | Aug 15, 2022 | FAQ TPMS Tools
High Line: vehicles with high line systems display the location of the specific under-inflated tire as well as the tire pressure for all tires. Low Line: vehicles with low line systems will not indicate the location of the under-inflated wheel tire, and usually only...
by Bill Andreas | Aug 15, 2022 | FAQ TPMS Tools
To locate and solve TPMS issues, you need to complete the following steps: 1. Use an Autel tool to activate sensors, read accompanying tire and sensor information and scan for trouble codes 2. Depending on the detected TPMS code, repair or replace the damaged part/s....
by Bill Andreas | Aug 15, 2022 | FAQ TPMS Tools
The tool may display “NA” for certain sensor and tire parameters after the sensors have been activated, for example: Temp (Temperature) displays “NA”, and/or BAT (Battery) displays “NA”, and/or Mode displays “NA”. The ability to display information for these...
by Bill Andreas | Aug 15, 2022 | FAQ TPMS Tools
A “multi-sensor” error means there is one or more sensors too close to the one you are attempting to program. Unless you have selected the Multi-Sensor programming method and are programming multiple sensors at one time, only one sensor should be close to...
by Bill Andreas | Aug 15, 2022 | FAQ TPMS Tools
Some manufacturers ship their TPMS sensors in Ship Mode. 1. Autel sensors have no Ship mode. Program the MX-Sensor for the vehicle, install, activate and relearn. 2. Siemens OE sensor may display “Ship” mode when activated. To enable this sensor, tap the Tool Kit on...
