Why does my tool display a “duplicated sensor ID” warning message when I cannot complete the relearn procedure and the TPMS malfunction light remains lit?

by Bill Andreas | Aug 12, 2022 | FAQ TPMS Tools

The same sensor might have been activated twice and therefore the tool is displaying duplicate IDs. When activating sensors, follow the procedure displayed on the screen and activate each sensor at the wheel in the order prompted by the display. Each Sensor on each...

Why does the TPMS light display “low pressure” days after I activated the sensors?

by Bill Andreas | Aug 11, 2022 | FAQ TPMS Tools

Problem description 1: Sensors are properly mounted and have been successfully relearned to the vehicle. The TPMS light displays a few days later indicating “low pressure”. I activated the sensors and the tires read low pressure. Solution: Please double check the...

Why does the vehicle’s TPMS light display the messages “please check tire pressure” and “low-pressure condition”?

by Bill Andreas | Aug 10, 2022 | FAQ TPMS Tools

1. Ensure the tires’ air pressure is consistent with the vehicle manufacturers recommended pressure. The vehicle tire placard, located on the door jamb of the driver door, will list the recommended air pressure. Check the tires for wear and leakage. It is best to...

Why was I unsuccessful in relearning IDs. after I performed auto relearn and drove the vehicle?

by Bill Andreas | Aug 10, 2022 | FAQ TPMS Tools

Drive the vehicle consistently at the speed of between 25 km/h and 100 km/h (15 mph and 62 mph) throughout the Relearn process. Wait at least 15 minutes before starting a second relearn.

Why can’t I complete the sensor relearn process?

by Bill Andreas | Aug 10, 2022 | FAQ TPMS Tools

Please carefully follow the step-by-step instructions displayed under Relearn Procedure on your Autel tool.