Solution: Ensure that the original sensor ID was correctly inputted.
FAQ TPMS Tools
Why does the TPMS light come on after relearning the sensor IDs, via the OBD relearn process, and after driving the vehicle for the time and at the speed advised in the relearn procedure?
Solution: Activate the sensors and ensure they are functioning and can be read.
Why does my tool display a “duplicated sensor ID” warning message when I cannot complete the relearn procedure and the TPMS malfunction light remains lit?
The same sensor might have been activated twice and therefore the tool is displaying duplicate...
Why does the TPMS light display “low pressure” days after I activated the sensors?
Problem description 1: Sensors are properly mounted and have been successfully relearned to the...
Why does the vehicle’s TPMS light display the messages “please check tire pressure” and “low-pressure condition”?
1. Ensure the tires’ air pressure is consistent with the vehicle manufacturers recommended...
Why was I unsuccessful in relearning IDs. after I performed auto relearn and drove the vehicle?
Drive the vehicle consistently at the speed of between 25 km/h and 100 km/h (15 mph and 62 mph)...
Why can’t I complete the sensor relearn process?
Please carefully follow the step-by-step instructions displayed under Relearn Procedure on your...
My vehicle had a collision. Now my TPMS light stays on. What do I do?
The vehicle may have a damaged TPMS module or non-functioning sensors or both. Use an Autel TPMS...
Why is the TPMS light lit on the dash of my 2005 vehicle?
The tire pressure control module might be faulty. Use an Autel tool with OBDII-connection...